FAST CAR RUNNING WITH NoS

Nitrous Oxide Dry Injection Kits

Nitrous oxide dry injection kits spray nitrous oxide into the intake Manifold and it is mixed with fuel and air at the injectors. Dry shots of nitrous oxide usually provide less of a power increase because there is no way of providing additional fuel to balance the extra oxygen in the combustion mixture. So you have to be a little conservative as too lean of an air-fuel mixture will cause the engine to just blow up. At least with stock factory injectors anyway.

Nitrous Oxide Wet Injection Kits

The other type of nitrous oxide injection is wet nitrous oxide injection. Wet nitrous oxide shots have fuel in them. This explains the usage of the word wet. The nitrous oxide is mixed together with fuel and a fogger injects this mixture directly into the throttle body. This provides the extra fuel to balance out the extra oxygen provided by the nitrous oxide, thus keeping the air-fuel mixture stoichiometric or not too lean. However wet nitrous injection kits might cause puddles of fuel to be stuck in the intake manifold, and cause severe backfire conditions.

There is also a hardcore form of wet nitrous shots called direct-port injection. In this system, each cylinder gets its own nitrous injector. For this modification, the whole intake manifold has to be removed and fitted with a custom one.

Is Nitrous Oxide Safe?

With the increased power being created, how does one control the process so that no engine blown cases will happen? Using wet nitrous shot kits is one way, as it mixes the additional fuel necessary to keep the air-fuel mixture balanced. Ignition controllers are also sometimes installed to retard the spark timing when nitrous oxide is being used, to prevent premature detonation, also known as knocking or pinging. Higher octane fuel should also be used.

Balancing the air-fuel mixture with the extra oxygen provided by nitrous oxide is also a tricky thing. Too lean and you’ll get detonation problems which will damage the engine. Too rich and you’ll lose power. But it’s all fun, tuning your car to the maximum performance. Good learning process.

Nitrogen Oxide_IN_TRunk

So how exactly does injecting nitrous oxide into the engine help? Combustion is basically igniting a mixture of oxygen and fuel in a combustion chamber with a sparkplug. The resulting explosion produces power. What happens is a nitrous oxide injection system pumps nitrous oxide into an engine’s intake system At 296 degrees Celsius, the nitrous oxide breaks down into nitrogen and oxygen. The loose oxygen atom is burned together with the combustion. More oxygen = more power. It’s as simple as that.

Of course there are some issues with the proportion of fuel and air and pre-mature detonation that we’ll look at later. Also, why not just inject oxygen instead of nitrous oxide since what we need is the oxygen anyway? Pure oxygen would result in too wild a combustion, resulting in a blow engine This is because the nitrogen atoms in the nitrous oxide have a function as well. The nitrogen atoms released have a cooling effect on the combustion temperature. It absorbs the heat and helps carry it away.

Nitrous oxide also cools the intake temperature by 60 to 75 degrees Fahrenheit and every 10 degrees Fahrenheit reduction in temperature gives you about 1% horsepower gains. So on top of the extra power provided by the extra oxygen, you get another 6-7% horsepower gains from the cooling effect. In one of the Sepang Drag Battle rounds, the winning Proton Satria used nitrous oxide to cool the intake air instead of an intercooler. That way, you save weight and reduce the lag that you get when you have to pass turbocharged air through the passages inside an intercooler.

Those who are more familiar with nitrous oxide would have heard the terms dry kit and wet kit.

Nitrogen Oxide!

When it comes to souping up cars, even laymen usually have two words in their heads turbo and NOS. NOS, or it’s proper name nitrous oxide. Sounds cool doesn’t it?

Contrary to popular believe, NOS isn’t the chemical acronym for nitrous oxide. It is actually the acronym for nitrous oxide systems, the largest manufacturer of automotive nitrous oxide injection systems out there. It’s become so synonymous with the gas like how Maggi is associated with instant noodles, Colgate is associated with toothpaste, or Nescafe with instant coffee, or how making a photocopy of something is called Xerox-ing. Nitrous oxide’s chemical designator is actually N2O, because it has 2 nitrogen atoms and 1 oxygen atom.

Let’s find out more about nitrous oxide injection systems.